Bissell is a huge name in the world of vacuum cleaners. In fact, it is one of the oldest brands in the floor cleaning industry. Today we’re going to share with you how to clean the Bissell PowerForce Compact vacuum. That way, you can rest assured it will always give you optimum performance.
If you want to know more about Bissell vacuum cleaners and what they have to offer, you can read our guide on them.
This post is not going to tell you all the good stuff about the vacuum. You will have to check out our in-depth review of it for that.
What it is going to tell you, however, is how to keep your vacuum in top shape. Cleaning is the most important maintenance you can do on a vacuum cleaner, for obvious reasons.
Table of Contents
Clean Bissell PowerForce – The process
There are a few components of a vacuum cleaner that should get good cleaning every now and then. The brush roll, dust cup, and filters are the main ones. So, those will be our focus.
How to clean the brush roll
As the brush roll combs through your carpets, the bristles are bound to pick up loose fibers and hair.
If these are not removed often, they’ll pile up and affect the vacuum’s performance. Now, let’s get on with the process.
- You will have to get a bit handy here as you’d need to loosen some screws to remove the cover.
- Unhinge the brush roll by pulling it out and separate it from the belt.
- Pick off hairs and fibers from the bristles.
- Afterward, re-attach the belt to the roller, fix it back in place, and screw on the cover.
That’s it! Quick and easy.
How to clean Bissell PowerForce Compact Vacuum dust cup
The dust cup is spacious enough to hold a sufficient amount of dirt. It is transparent so you’d easily know when you need to empty it.
There’s an “empty” button on the dust cup handle. Press it and pull the handle to detach the entire dirt canister.
You’ll also find a button at the lower part of the dust cup that opens it at the base so its content can fall into the trash. If you want to have the dust cup spic and span you can wipe the insides with a microfiber cloth.
How to clean the filters
Filters are an important part of a vacuum cleaner. It is what allows an asthmatic or allergic person to use a vacuum cleaner without getting triggered.
The filters need regular cleaning depending on how often you use the vacuum. Fortunately, it is an easy task with the Bissell PowerForce.
This vacuum has a pre-motor and a post-motor filter. This is a good thing because the air that flows out from the vacuum has filtered twice.
To clean the pre-motor filter:
- Pull the latch at the top of the dirt canister to open it.
- Gently remove the foam filter and wash it with a mild detergent. Allow it air dry before replacing it for the next use.
- Deep down cleaning removes embedded dirt and hair
- Lightweight and Maneuverable - Easy to clean all around your home
- Washable filter- Means not having to replace filters as often
- Exclusive Performance System with Helix Dirt Separation - for longer lasting pick-up performance.
- Full set of on-board tools
How to clean the dirt separator
There is a component inside the dust cup that separates solid and airborne dirt to maximize the airflow. This one too needs cleaning as it comes in contact with dirt often.
- Twist the transparent dust cup to the right to release it and gain access to the dirt separator.
- Pull it out, wash and dry with a paper towel before fixing it back.
This upright vacuum is quite easy to use and maintain as you have seen. All you have to do is follow these procedures routinely and your vacuum will remain in top form to do your bidding.
To clean Bissell PowerForce Compact Vacuum is the best way you can make it last longer while getting the best out of it. We hope you got the information you’re looking for. Finally, do let us know how well it worked for you.